manualshive.com logo in svg

TYAN S2257 THUNDER 2400, Руководство пользователя, Страница: 51 / 105

Поделиться
Скачать
TYAN S2257 THUNDER 2400 Скачать руководство пользователя страница 51

S2257   Thunder 2400

51

subdirectory ‘LAN82559’.  Please note:  You must use the drivers provided

in the Tyan CD only.  These drivers have been tested and approved by

Tyan engineering.

Q: 

Why does my Intel Ethernet work only intermittently?

A:

  The Inter Ethernet only operates under standby current; therefore, your

power supply must be ATX 2.01 Compliant with a minimum SB5V current of

750mA.

Q: 

Why does my keyboard LED remain on after the system is turned off?

A:

  This situation is most likely caused by the enabling of Keyboard Wake-Up

Function (under the Peripheral Setup) in the BIOS.  When enabled, the

motherboard would provide a standby voltage to the keyboard.  This would

subsequently cause the LED to remain on.

Q: 

 How do I enable the Keyboard Wake-Up function?

A:

 You will need go into the BIOS and enable the LAN Wake-Up for Onboard

LAN (under the Power Management Setup) and the Keyboard Wake-Up

Function (under the Peripheral Setup).  When both functions are enabled,

you can start up your system by hitting the Ctrl key and the F1 key at the

same time.  By default both the LAN Wake-Up and Keyboard Wake-Up

functions are disabled.

INST

A

LL

Содержание S2257 THUNDER 2400










































































































Отзывы:

Нет отзывов