Thunder 2500 S1867
39
If you are using the S1867 or are installing with LSI Symbios 53C896 with 53C896 or 53C1010 chip then you must install NT 4.0 with a standard 1.44MB floppy
disk
.
Q:
Where can I get Intel PRO/100+ Management Adapter drivers?
A:
Y
ou will find the drivers located in the
Tyan Drivers CD under the
subdirectory LAN82559. Please note:
You must use the drivers provided
in the
Tyan
CD
only
.
These drivers have been tested and approved by
Tyan engineering.
Q:
Why does my Intel Ethernet work only intermittently?
A:
The Inter Ethernet only operates under standby current; therefore, your
power supply must be
ATX 2.01 Compliant with a minimum SB5V
current of
750mA.
Q:
Why does my keyboard LED remain on after the system is turned off?
A:
This situation is most likely caused by the enabling of Keyboard
W
ake-Up
Function (under the Peripheral Setup) in the BIOS. When enabled, the motherboard would provide a standby voltage to the keyboard. This would subsequently cause the LED to remain on.
INSTALL
