http://www.tyan.com
70
Chapter 4
BIOS Configuration
2. Insert the floppy disk with the BIOS upgrade into the A: drive.
3. Turn the power off.
4. While holding the <Ctrl> and <Home> keys, turn the power on. The
system will begin to read from the A: drive, and write the BIOS infor-
mation contained on the floppy disk in that drive to the EEPROM chip.
When the BIOS has been totally reprogrammed, the system will reboot
with the new BIOS in operation.
5. If the system does not reboot in three minutes, power down the
system, wait a few seconds, and then turn the power back on again.
You will be prompted to press <F1> to run Setup. You may check your
settings at this time, or simply save and exit the program.