http://www.tyan.com
59
BIOS
Slow Clock Ratio
This option specifies the speed at which the system clock runs in the
Standby Mode power saving state. The settings are expressed as a
percentage of the normal CPU clock speed. The settings are 0-12.5%,
12.5%-25%, 25%-37.5%, 37.5%-50%, 50%-62.5%, 62.5%-75%, or 75-
87.5%.
Display Activity
When set to Monitor, this option enables event monitoring on the video
display. If set to Monitor and the computer is in a power saving state,
display activity will cause the system to enter the Full On state.
AMIBIOS reloads the Standby and Suspend timeout timers if display
activity occurs. The settings are Monitor or Ignore.
Device n (Device identity)
When set to Monitor, these options enable event monitoring on the
specified hardware interrupt request line. If set to Monitor and the
computer is in a power saving state, any activity on the IRQ line will
cause the system to enter the Full On state. AMIBIOS reloads the
Standby and Suspend timeout timers if activity occurs on the specified
IRQ line. The settings for each of these options are Monitor or Ignore.
The Optimal default setting is Ignore for all devices except Device 0
(Primary master IDE).
LAN Wake-up
This option enables the Wake-on LAN feature. The settings are
Disabled or Enabled.
PC98 Power LED
This option enables the PC98 Power LED feature. The settings are
Disabled or Enabled.
Fan OFF at Suspend
This option controls the CPU/Chassis Fan on/off setting while the
system is in suspended mode. The settings are Disabled or Enabled.
