http://www.tyan.com
27
Submit
Use this button to save configuration changes.
Figure: Submit
Note2:
If you want to validate the configuration, you should close the
ByPassUI window first to quit and reset the NIC
card. When the warning
window pops up, click
Yes
to quit and reset the NIC card, as shown in Figure
below.
Figure: Validate the Configuration
Note3:
To verify the setting of watchdog timeout value work or not, you can
type “
BypassUI.exe Stop_Service
” in a command prompt window and NIC
card will switch from normal to bypass mode when watchdog timer count down
to zero.
