background image

 

 

http://www.tyan.com

 

87

Appendix IV: Technical Support 

 
 
If a problem arises with your system, you should first turn to your dealer for direct 
support. Your system has most likely been configured or designed by them and they 
should have the best idea of what hardware and software your system contains. 
Hence, they should be of the most assistance for you. Furthermore, if you purchased 
your system from a dealer near you, take the system to them directly to have it 
serviced instead of attempting to do so yourself (which can have expensive 
consequence). 
 
 
If these options are not available for you then MiTAC International Corporation can 
help. Besides designing innovative and quality products for over a decade, MiTAC 
has continuously offered customers service beyond their expectations. TYAN’s 
website (http://www.tyan.com) provides easy-to-access resources such as in-depth 
Linux Online Support sections with downloadable Linux drivers and comprehensive 
compatibility reports for chassis, memory and much more. With all these convenient 
resources just a few keystrokes away, users can easily find their latest software and 
operating system components to keep their systems running as powerful and 
productive as possible. MiTAC also ranks high for its commitment to fast and friendly 
customer support through email. By offering plenty of options for users, MiTAC 
serves multiple market segments with the industry’s most competitive services to 
support them.   
 
 
Please feel free to contact us directly for this service at [email protected] 
 
 

Help Resources: 

 
1. See the beep codes section of this manual. 
2. See the TYAN’s website for FAQ’s, bulletins, driver updates, and other 
information: 

http://www.tyan.com

 

3. Contact your dealer for help before calling TYAN. 
4. Check the TYAN user group: alt.comp.periphs.mainboard.TYAN 
 
 

Содержание B8236G70W8HR-HE-IL


























































































Отзывы: