TYAN B5630G86CV12 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 162

TYAN B5630G86CV12 Скачать руководство пользователя страница 2

http://www.tyan.com

2

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is
protected under international copyright laws, with all rights reserved.
Neither this manual, nor any material contained herein, may be reproduced without
written consent of manufacturer.

Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights
reserved.

TYAN

®

is a registered trademark of MITAC COMPUTING TECHNOLOGY

CORPORATION.

Version 1.0

Disclaimer

Information  contained  in  this  document  is  furnished  by  MiTAC  COMPUTING
TECHNOLOGY  CORPORATION  and  has  been  reviewed  for  accuracy  and
reliability  prior  to  printing.  TYAN

®

assumes no liability whatsoever, and disclaims

any express or implied warranty, relating to sale and/or use of TYAN

®

products

including liability or warranties relating to fitness for a particular purpose or
merchantability. TYAN

®

retains the right to make changes to produce descriptions

and/or specifications at any time, without notice. In no event will TYAN

®

be held

liable for any direct or indirect, incidental or consequential damage, loss of use, loss
of data or other malady resulting from errors or inaccuracies of information
contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.

TYAN

®

is a trademark of MiTAC COMPUTING TECHNOLOGY CORPORATION.

Intel

®

is a trademark of Intel

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

IBM

®

, PC

®

, AT

®

and PS/2

®

are trademarks of IBM Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

«
1
2
3
4
...
»

Содержание B5630G86CV12



































































































































































Отзывы:

Нет отзывов