TYAN B4882, Руководство пользователя

Страница: 47 / 72

3.7 Replacing the power supply
Chapter 3: Replacing pre-installed components 39
3.7 Replacing the power supply
Follow these instructions to replace the power supply in your
TX46 system.
1. Remove the front and rear chassis covers as described
in section 2.2.1 Removing the chassis cover .
2. Remove the single screw that secures the grounding wire
to the chassis as shown.
3. Pull the two spade connectors off the terminals on the
back of the AC power socket.
4. Remove the two screws that secure the power supply to
the chassis and lift the unit free.
5. Secure the new unit in place with two screws, reconnect
the spade connectors on the AC power socket and
reconnect the grounding wire to the chassis.
Note:
For safety reasons, it is essential
that the grounding wire is connected to the
chassis.