TX RV-007, Руководство по эксплуатации

Страница: 42 / 48

39
6) Make sure that the Timer Mode is set to Recorder (If the Timer Mode is left in Schedule, the
set top box will only turn on without recording the programme)
7) Press OK to confirm recording settings.

After recording timer has been set, you can put the box in stand-by mode. The set top box will
automatically turn on to record the programme according to the schedule and will go back to stand-by
mode again after recording ends. The recording time of each event must not overlap those of others.
The
box will stop recording if user changes channel.

The set top box will create MYRECORD folder to record the programme file. If there is not enough space,
recording will end automatically. To play recorded file, enter the Main Menu USB > [Multimedia] > [My
Recorder], then select the file that you would like to play.
Note

The manufacturer cannot guarantee compatibility with all USB mass storage devices and
assumes no responsibility for any loss of data that may occur when connected to this unit.

To record High-definition content, USB 2.0 device or higher is required

Some USB devices may not be properly recognized.