TX RV-007, Руководство по эксплуатации

Страница: 35 / 48

32
TV Setup
1) Select [TV Format] and press
◄
/
►
to adjust the aspect ratio ( 16:9 LB / 16:9 FIT / 4:3 LB / 4:3 PS)
2) Select [TV Mode] and press ◄ / ► to change the output mode ( Auto / PAL / NTSC) to your TV .
Incorrect setting may lead to distortion and malfunction of your TV screen.
3) Select [Video Output] and press ◄ / ► to change the output of the video signal ( HDMI / RCA(CVBS) /
YCbCr (YUV)) This setting must correspond to the connection that you use to connect between the set top
box and your TV.
4) Select [TV resolution] and press ◄ / ► to change the resolution of the signal to your TV. If HDMI or
YCbCr (YUV) is selected, you can choose between Auto / 720p_50Hz / 1080i_50Hz / 1080p_50Hz. This
setting must correspond to the connection that you use to connect between the set top box and your TV.
(If the set top box is connected to the TV using
RCA(CVBS), TV resolution is fixed at 576i)
5) Select [OSD Transparency] and press ◄ / ► to adjust the transparency of OSD, You can choose from
the lowest [8] to the highest [1] transparency.
6) Select [Banner Display Time] and press
◄
/
►
to adjust the length of the banner display time. You can
choose between 1 / 3 / 5 / 10 / 30 S / Always.