Earbud wearing and powering on/off
For the best result and comfort please wear the earbuds correctly according
to the symbols L and R on the back of the earbuds. Align the earpiece into the ear
canal, rotate it back and forth to place it in the best comfortable angle.
The earbuds will power on automatically once you take them out of the
charging case. You can also power them on manually if the charging case is not
around. To do so, press and hold the touchscreen of both earbuds for two seconds
until the blue and red indicator lights alternately start flashing.
The earbuds will automatically power off once you put them back into the
charging case. If you don’t have the charging case around, you can disconnect your
phone’s Bluetooth and the earbuds will automatically turn off after 5 minutes. Also,
you can turn them off manually by holding both touchscreens of the earbuds for 6
seconds. The red light will turn on as an indicator that the earbuds are powered
down.
Pairing
Take out the earbuds from the charging case. They will turn on and pair with
each other automatically. To pair them with your phone, turn on the Bluetooth on
your device and search for available devices, and tap on the TWS M7 to connect.
When using the earbuds again, they will automatically pair with the latest used
device after power on.
If they can’t be paired automatically, please try the following steps:
1. Turn off the Bluetooth on your phone and turn off the earbuds and then press
the touchscreen for 3 seconds until you see the red and blue light flashing.
2. Double-tap the touchscreen on one of the earbuds and wait for 3 seconds.
The earbuds will pair with each other once you see one flashing red and blue
and the other is not flashing at all.
3. Turn on the Bluetooth on your device and pair with the earbuds as described
above.
