Twothousand TT-F60, Руководство по эксплуатации

Страница: 6 / 11

mz_W_ _Ÿ_””
m™Œ•Š m™Œš
mzXWW XWŸXW””
kz___ _Ÿ_Ÿ_””
kzXWWW XWŸXWŸXW””
kŠ•Ž
kzYWWW YWŸYWŸYW””
4.4. USE OF THE DISCS
THE UNIT IS SUPPLIED WITH THE EJECTOR FITTED TO THE DRIVE SPINDLE. OPEN
THE COVER LOCK AND LIFT THE COVER FULLY IN ORDER TO REMOVE THE
EJECTOR.
BEFORE STARTING WORK, ALWAYS CHECK THE CLEANLINESS OF THE CUTTING
CHAMBER, THE DRIVE SPINDLE, THE EJECTOR, THE CUTTING DISCS AND THE
GRID.
1) FOR SLICING, SHREDDING AND GRATING
g
FIT THE EJECTOR ONTO THE FLAT OF THE DRIVE SPINDLE.
g
FIT THE DISC REQUIRED (SLICING, SHREDDING OR GRATING).
-- TURN THE DICS IN A CLOCKWISE DIRECTION TO INSERT THE BAYONET FITTING,
THEN CONTINUE IN THE SAME DIRECTION UN I T L IT REACHES THE PIN.
-- TO REMOVE THE DISC, TURN IT IN THE OPPOSITE DIRECTION AND LIFT IT USING
THE FINGER HOLES AT THE EDGES OF THE DISC.
-- CLOSE THE COVER AND LOCK IT.
2) FOR CUTTING INTO CHIPS OR CUBES
g
FIT THE EJECTOR.
g
FIT THE GRID INTO ITS HOUSING AND CHECK THAT IT IS SEATED CORRECTLY
(SEATING AREA IS CLEAN). THE UPPER FACE OF THE GRID MUST BE SLIGHTLY
BELOW THE TOP OF THE MACHINE BODY.
g
THEN FIT THE CHOSEN DISC AND CLOSE THE LID.