Crepe Maker User Manual
6. Transportation, Cleaning and maintenance
6.1 Transportation
In the process of transportation, the appliance should be handled carefully, preventing
the intense shaking. The packaged appliance should be stored in a well-ventilated area
free of caustic air. It cannot be placed in the outside area and should never be put
upside down. Keep it dry and dust-free. Do not expose it to direct sunlight. Avoid
mechanical shocks and vibrations. If it is for temporary storage, the weather-proof
method should be taken.
6.2 Safety advice
Before starting repair or cleaning works, make sure the unit has been disconnected
from power socket (pull off the power plug!!!) and has cooled down completely.
Do not use any acid or abrasive detergents and make sure no water runs into the
internal part of the unit.
To protect yourself from electric shock, never immerse the unit, the power cord and the
plug in water or other liquids.
CAUTION! The appliance is not jet-proofed. Therefore, you must not use any kind of
pressure water jet for cleaning it!
6.3 Cleaning
The device should be cleaned regularly.
Pull the power plug and cut off the power cord before cleaning. Make sure it does not
touch any hot or wet areas. Damage will be done to the power cord.
Let the unit cool down completely.
CAUTION!
Do not use any water to clean the control panel. Thereby, ensure no water inside the
unit. Thoroughly dry off the unit before operating the unit again!
Control panel, surface of the device and power cord should only be wiped off with a
piece of soft cloth dipping a mild cleaning detergent solution. You must not let water
enter the switching unit. This may lead to dangerous leakage current and malfunctions
of the appliance.
Do not use any aggressive cleaning agents or abrasive materials as these could damage
the protecting film of the stainless steel and leave the iron particles on the surface of
the unit, which can cause rust.
All parts must be dried thoroughly and reassemble the parts of unit, which have been
dismantled for cleaning.
Do not use a water jet to clean the unit. The unit has not been weather-proofed.
Store the device in a dry and ventilated place if the unit stays idle for a long time. Keep
it away from acid steams and caustic gases.
6.4 Safety instructions for maintenance
●
Check the power cord for damage periodically. Never operate the unit when the
power cord has been damaged or broken. If the power cord shows the above signs, call
a qualified electrician for replacement. It is highly recommended that the replaced
power cord should be the special type designated by the manufacturer. Damage may be
7
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 |
WWW.TWOTHOUSANDCO.COM
