Dough Sheeter User Manual
8.
CONVEYOR ( G ) TOO TIGHT :
Machine locates at a humid place may cause conveyor becomes shorter. If conveyors arc too tight,
loose nuts ( K ) during regular inspection.
If conveyors ( G ) are too tight, it may.
a.
Has not sufficient horse power.
b.
Damage bearing & shaft of active roller and passive roller .
c.
Over load and damage driving gear .
Chapter 3
MAINTENANCE
1.
CHANGE GEAR :
Switch off power, applying screw driver to dismantle side plate of lower machine body disconnect 3
electrical wires on the connecting box. Lift up safety guards and switch off
Power switch off, then set the thickness handle to scale “o” apply alan-key M5 to open cover take
out gear housing ,then replace the gears, after replacement, reverse the procedures and set the
thickness handle to scale “ o “.
2.
REPLACE DRIVING ROLLER AND BEARING :
Switch off power , lift up safety guards and switch off power switch off. Then apply alan-key
To open cover, loose the nuts of bearing , use a cress type screw driver to move bearing through
the joint or roller and bearing ,replace the roller and assembly by
Reversing procedures.
3.
CHARGE CONVEYORS :
a.
Remove the roller by following the procedures mentioned above.
b.
Apply spanner M 12 to take the belts on roller and remove product tray .
c.
Apply spanner M 23 to loose the nuts of roller.
d.
Use spanner M 19 to loose the belts of support and separate the table.
e.
Use spanner M 14 to take away the belts of table holder and separate them.
f.
Dismantle the table and belts for replacement .
g.
Assembly by reversing the processes .
h.
The tightness of belts should be properly , when machine is running , press the belts
slightly and check if slip happened between belts and roller.
4.
CLEANING:
Wash the conveyor belt by clean water when working is finished everytime.the machine can not use
until the conveyor belt become dry.
5. DAILY MAINTENANCE:
Please fill with oil when working is over everyday.
5
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 |
