Twose TP5750, Руководство по эксплуатации

Страница: 52 / 54

39
Tele Arm Wear Pads - TP6750T Models
Over a period of time during normal use the contact faces of the replaceable wear pads
will erode due to friction generated from the sliding surfaces of the tele arm – the wear
rate of these nylon compound pads may vary considerably and will be determined by the
frequency of use of the telescopic function. To accommodate for pad wear, sets of
adjusters are located on the socket arm – each adjuster offers approximately 5-6mm of
adjustment.
Wear of the pads should be checked on a regular basis by measuring the gap between the
pads and the tele arm using a feeler gauge at the open end of the socket arm - if the gap is
in excess of 1mm the pads will need to be adjusted.
NOTE: The tele arm should be fully
retracted before attempting to loosen or adjust the pads.
Wear pads will need replacing when the outer face of its adjuster is flush with the surface
of the arm. In order to retain smooth operation of the tele arm it is advisable to replace
pads in opposing sets at each position on the arm.
WEAR PAD INSTALLATION
Replacement of the tele arm wear pads will necessitate the removal of the following
components in order to remove the tele dipper arm from the dipper arm socket:

Removal of the flail head.

Remove hose guard.

Remove the lower end fixings of the rigid flail pipes and return hose.

Disconnect the angling ram and hoses.

Removal of the tele ram (piston rod end) from the tele dipper arm.

Release of the pad adjusters and withdrawal of the tele dipper arm from its socket.
With the dipper arm socket and telescopic dipper separated coat the inner surfaces of the
socket arm and outer surfaces of the tele arm with wax oil prior to re-assembly this will
serve to both protect and lubricate the arms - this procedure should be performed in a clean
and dry dust free environment to ensure the lubricated sliding surfaces of the arms do not
become contaminated by dirt, grit or moisture.
Pad Adjuster Tool
(Part No. 214.018)
Location of Tele Pad Adjusters