Twose Opticut 220, Руководство оператора и каталог запасных частей

Страница: 22 / 86

OPTICUT 220/260/300
Rotary Disc Mowers
12
Post Attachment Checks
After attaching the machine the following checks should be performed, ensure the tractor is
switched off and the starting key removed.
Check the attachment of the machine to the tractor;

Operating height of the hitch.

Hitch installation.

Frame angle
(2° inclination in the direction of travel)
.
Check position of the support leg.
Check all guarding is correctly located and undamaged.
Check lubrication levels in all drives.
Check all vital parts are present and working correctly.
Check parts for wear, damage or looseness on used machines, particularly;

Blades.

Discs
.

Quick change blades.

Belts.

Guards.

Protection curtain.
In the event of damage or excessive wear to vital parts of the machine, replacements
must be sourced and fitted before attempting to operate it. Each disc on the machine is
fitted with 2 blades; these must be new or evenly worn. For safety and long working life
always replace components with genuine parts from the manufacturer.
With all persons are kept at a safe distance from the machine, conduct a test run with the
machine running at 540RPM.

In the event of excessive noise and/or vibration, stop the machine and correct the
problem.

If the problem continues, contact authorised service centre for advice or help.
If all the above criteria are met the machine is ready for operation.