Twose Opticut 220, Руководство оператора и каталог запасных частей

Страница: 21 / 86

OPTICUT 220/260/300
Rotary Disc Mowers
11
Hydraulic Connection
The machine requires one hydraulic
connection; this is for operation of the
hydraulic ram that raises and lowers the
cutterbar.
The minimum working pressure necessary to
operate the machine is 50bar and a maximum
of 200bar.
Before connecting the hydraulic hose (1) to the tractor ensure that the control for that
service is in the midpoint ‘off’ position and the system is not pressurised.
NOTE: Ensure all hydraulic connections are kept free from dirt and other contaminates that
can cause damage to a hydraulic system.
Transport Locking Mechanism
Route the operation cord (1) for the transport locking
mechanism (2) into the tractor cab through the rear
window – ensure sufficient slack is retained in the cord
run to avoid accidental operation of the mechanism.
Fix the cord to a suitable location in the cab that is easily
accessible to the operator.
WARNING!
The transport latch operation cord must be slack at all
times to avoid unintentional operation of the latch. Ensure
the cord is kept clear of any components on the tractor
and the machine that may cause accidental tightening of
the cord and operation of the latch.
Ballast
Add front end weights to the tractor if required to increase stability of the unit for both
transportation and work. Refer to tractor manufacturer’s handbook for advice on ballasting.