2018/06/02 11:40
9/28
Torpedo C.A.B. User's Manual
User's manuals - http://wiki.two-notes.com/
1. Guitar/bass
2. Guitar/bass preamp
3. Torpedo C.A.B.
4. Audio interface
5. PC/MAC with
Torpedo Remote
6. Effect pedals
7. Guitar/bass
8. Headphones
Even if it was design to go on stage, the Torpedo C.A.B. fits perfectly in a studio or at home, to bring
you the greatest tone with your pedals or preamplifiers, whatever the circumstances.
3.2 Using the C.A.B. with pedals, preamplifier or amplifier
Plug your Torpedo C.A.B. as the last mono pedal on your pedalboard (for example after your distortion
pedal). Select the GTR position of the IN LEVEL selector. If you want to use a preamplifier, plug its line
output into the Input of the unit, select the LINE position of the IN LEVEL selector.
If you have a guitar or bass amplifier, you have two options to make it work with the Torpedo
C.A.B.:
Connect a loadbox (such as the Torpedo Captor) to the speaker output of your amp,
1.
then connect the uncompensated output (meaning without any kind of filter/analog speaker
simulation) of the loadbox to the Torpedo C.A.B. Depending on the output level of the loadbox,
try both positions of the IN LEVEL selector to find the appropriate input level. When using the
Torpedo C.A.B. with a loadbox, we recommend switching OFF the Power Amp
simulation section.
Use the FX loop of the amplifier: connect the send output of your amp to the Torpedo C.A.B.
2.
Depending on the output level of the FX loop output, try both positions of the IN LEVEL selector
positions to find the appropriate Input level. In this configuration, the amp's speaker output
