2018/06/02 11:40
11/28
Torpedo C.A.B. User's Manual
User's manuals - http://wiki.two-notes.com/
to the
Two notes Audio Engineering
website and click on the “Community” section.
Two notes is also on the social networks
,
Soundcloud
and
Youtube
— so do not wait and
come share your creative work!
4 Configuring and using the Torpedo C.A.B.
4.1 The Torpedo C.A.B. interface
The Torpedo C.A.B. parameters are organized in menus, accessible by different push-buttons and
knobs as seen in
figure 2.2
.
Two 2-function rotary encoders: PRESET/PARAMETER, OUT LEVEL/VALUE
Two push-buttons: SETUP and EDIT/HOLD TO SAVE
Two selector switches: IN LEVEL and OUT LEVEL
Two programmable footswitches: A and B
When pushing a button or turning an encoder, you will see a parameter moving on the display.
4.2 Level control
The In Level selector switch (GTR for instrument level, Line for line level) controls the input gain of the
unit. The Torpedo C.A.B. is a digital product, it is absolutely critical to avoid any saturation of the input
signal to avoid the risk of considerably reducing audio quality. The best signal sent to the Torpedo
C.A.B. will be loud enough to benefit of the full dynamic range of the analog to digital converter,
without distortion.
The input gain adjustment must be done in presence of an input signal. The red CLIP LED lights up in
case of saturation at the input stage: lower the volume of the unit plugged into the Torpedo C.A.B.
and/or change the selector switch position.
In case you have different type of sounds that will be sent alternatively to the Torpedo C.A.B. (clean,
crunch, distortion…), try to limit the volume difference between these different sounds.
4.3 Programmable footswitches
The A and B footswitches are programmable. You can assign two different functions to them: one is
activated by a short click, the other by a long click (hold). The factory settings of the footswitchs is
the following:
Footswitch Short click Long click
A
Preset -
Bypass
B
Mute
