2020/06/26 14:07
23/35
Torpedo C.A.B. M+ User's Manual
User's manuals - https://wiki.two-notes.com/
4.3.6.2 Audio performance
This setting combines the resolution of the third-party
IRs you are using and the latency it generates. If you
choose a low latency setting, your IRs will be truncated
at 40ms. Selecting a higher resolution for the IRs (up to
200 ms) will result in more latency.
The indicated latency is the actual latency of the whole device, measured from the input to the
output. Even at the highest setting, the latency is low enough not to be noticed when playing.
However, latencies add up when using several digital products, which can lead to a point where it
becomes noticeable. In that case, lowering this setting can prove useful.
4.3.6.3 High Input Gain Filter
The Torpedo C.A.B. M+ provides a clean foundation
tone for your pedalboard. For optimal results, we
advise setting the IN LEVEL switch at 0 dB. In the event
you wish to use your guitar straight into the C.A.B. M+
and boost the input with the +12dB, we provide a filter
to keep your tone as pure as possible from any
parasitic noise. This filter is set at 37% by default.
4.3.6.4 Memory card browser
The Torpedo C.A.B. M+ comes with a memory card of
256 MB to have access to more third-party IRs in the IR
loader mode. Here you can browse the IRs you have
loaded on the memory card (only 48KHz .wav files are
displayed). If you need to load other formats of IR files,
please read below on how to do so using Torpedo
Remote.
4.3.6.5 Memory card mount
When your Torpedo C.A.B. M+ is connected to a
computer, you can view the content of the memory
card by pressing Enter (the right encoder knob) to
mount the memory card. Your pedal will then show up
as a storage unit in your computer.
When the memory card is mounted, the interface of the C.A.B. M+ is locked, in order not to interfere
with the computer. Press ENTER once you finished editing, copying, moving or erasing files to unlock
the C.A.B. M+.
4.3.6.6 BLE Pin code
When you activate the Bluetooth control from your mobile device,
to sync with the Torpedo C.A.B. M+ you will need to input the pin
given here. If you want to reset the pin, you press Enter to renew
the pin, and you have to power the unit off (unplug the power
adaptor) then on (plug the power adaptor back in) to reboot the
unit so that the new pin is taken into account.
