2020/06/26 14:07
11/35
Torpedo C.A.B. M+ User's Manual
User's manuals - https://wiki.two-notes.com/
3.1 Using the C.A.B. M+ with your pedalboard
Plug your Torpedo C.A.B. M+ as the last mono pedal on your pedal board (for example after your
distortion pedal). You connect your pedal board to the AMP/INST/LINE IN (item N°4 in the
above) of the Torpedo C.A.B. M+, and the DI OUT (item N°12) or LINE OUT (item N°13) to a
mixing desk or an audio interface. The Torpedo C.A.B. M+ provides a clean foundation tone for your
pedalboard. For optimal results, we STRONGLY suggest you set the “IN LEVEL” switch at unity, which
is 0dB. If you wish to boost the input and use the +12dB setting (which will cause some obvious
artefact floor noise due to the input gain being increased), we have built a filter (see section 4.3.6.3
High Gain Input Filter) to keep your tone as pure as possible and keep the artefact floor noise to a
