Two notes Audio Engineering ReVolt Bass, Руководство пользователя

Страница: 16 / 16

Last update:
2022/12/12 14:25
revolt_bass:revolt_bass_user_s_manual https://wiki.two-notes.com/doku.php?id=revolt_bass:revolt_bass_user_s_manual
https://wiki.two-notes.com/ Printed on 2022/12/12 17:37
4.2 FX Loop CC
Please note, by default ReVolt’s default FX Loop CC state is set to 14.
Using this setup menu allows the user to select the FX Loop CC state per channel. The CC number is
displayed and incremented in the same manner that the MIDI PC number is actioned. For further
details, please see the “PC Number” section.
5. Firmware Version / Factory Reset
Using this setup menu allows the user to view the current Firmware version installed on the ReVolt
unit as well as options to action a Factory Reset.
Upon entering this setup menu, the current Firmware Version number is displayed on ReVolt’s
channel LEDs.
To action a Factory Reset, press Channel A’s footswitch 3 times. With each press, the Channel LED
color shifts to white. After completing the sequence, the tube window will show white and the Channel
LEDs remain on for 2 seconds indicating that the factory reset has occurred correctly. Once the
Factory Reset has been actioned, the unit will resume to display the current Firmware Version across
the channel LEDs.
From:
https://wiki.two-notes.com/ - User's manuals
Permanent link:
https://wiki.two-notes.com/doku.php?id=revolt_bass:revolt_bass_user_s_manual
Last update: 2022/12/12 14:25