Last update:
2022/12/12 14:25
revolt_bass:revolt_bass_user_s_manual https://wiki.two-notes.com/doku.php?id=revolt_bass:revolt_bass_user_s_manual
https://wiki.two-notes.com/
Printed on 2022/12/12 17:37
Input
Size
Function / Specifications
RETURN
6.35mm (1/4“)
Jack 6.35mm (1/4“) unbalanced (TS)
Max input level: 11dBu
Impedance: 1MΩ
Unbuffered, directly connected to Output when active
OUT
6.35mm (1/4”)
Jack 6.35mm (1/4”) unbalanced (TS)
Max output level: 11dBu
Impedance: 300Ω
MIDI IN
3.5mm (⅛”)
MIDI adapter cable. Pinout: TIP=DIN 5 RING=DIN 4 SLEEVE=DIN 2
MIDI OUT
3.5mm (⅛”)
MIDI adapter cable. Pinout: TIP=DIN 5 RING=DIN 4 SLEEVE=DIN 2
GND LIFT
PUSH BUTTON
With the switch engaged it opens (disconnects) the connection
between the ReVolt ground and the balanced audio output.
BALANCED OUT XLR
XLR, balanced Impedance: 600Ω balanced, 300Ω unbalanced
Max output level: 11dBu
12V DC 600mA 2.1mm
Mains power adaptor DC Jack 2.1mm, negative center Input voltage;
12V DC Power consumption; approx. 6W Current draw: 600mA
Advanced Functionality
1. Using the Setup Menu System
The setup menu is entered by holding down footswitch A and providing power to the device. When the
setup menu is entered, the “tube window” will show the “first page” color.
Press footswitch B to go to the next page.
Press footswitch A to go to the previous page.
Press footswitch C to enter a page.
When the last page is selected, pressing footswitch B will select the first menu and the channel
LEDs will flash quickly.
When the first page is selected, pressing footswitch A will select the last menu and the channel
LEDs will flash quickly.
To enter a sub-menu, press the footswitch C button. The “tube-window” color will quickly blink.
Once in a sub-menu, a power-cycle is required to exit.
Valid settings are saved immediately
Every time there is a number displayed to the user, it is done using the channel LEDs:
Channel A : 100s
Channel B : 10s
Channel C : units
Example: Number 123 is reported as 1 blink on channel A, 2 blinks on channel B and 3
blinks on channel C. The same process applies for error messages.
