background image

A064SPO29991407

Parts List

P.2

COVERING:
   TOUGHLON STL 202 GRAY
   TOUGHLON STL 330 CADMIUM YELLOW
   TOUGHLON STL 340 OLIVE DRAD

  1. MAIN WING -- 1 pair

  2. RETRACTABLE LANDING GEAR -- 1 set
      SCREW KA3x14mm -- 8 pcs
      RIGHT ANGLE WHEEL SPACER PL4121040 -- 2 sets
      COLLAR 4.1mm w/ Set Screw -- 2 sets
      MAIN WHEEL Ø58mm -- 2 pcs
      RETRACTABLE LANGING GEAR COVER -- 2 sets

  3. SERVO MOUNTING PANEL PL5310000 -- 1 pair
      SCREW PWA2x8mm -- 8 pcs

  4. TRI-HORN M3x14mm (L) -- 2 sets
      STRAPER -- 2 pcs
      CLEVIS -- 2 pcs
      FUEL TUBE  Ø6x5mm -- 4 pcs
      SCREW PB2x12mm -- 2 pcs
      SCREW PB2x16mm -- 4 pcs
      PUSHROD Ø1.8x90mm w/ Threads (For Aileron) -- 2 pcs

  5. PLYWOOD 9x29x90mm (Wing Joiner) -- 1 pc.
      PLYWOOD 4x30x61mm -- 1 pc.
 
  6. LINKAGE CONNECTOR Ø2.1mm w/ Set Screw -- 2 sets
      PLYWOOD 3x32x62mm -- 1 pc.

  7. PLYWOOD 2x8x20mm -- 1 pc.
      RING Ø2.3mm -- 2 pcs 
      STRAPER -- 1 pc.
      CLEVIS -- 2 pcs
      FUEL TUBE Ø6x5mm -- 3 pcs
      PUSHROD Ø1.8 mm Y-style w/ Threads (For Flap Servo) --1 pc

  8. DROP TANK -- 1 pc.
      SOCKET HED SCREW M3x14mm -- 2 pcs
      WASHER d3xD7mm -- 4 pcs
      M3 NUT -- 2 pcs

  9. STABILIZER & ELEVATOR-- 1 set

10. VERTICAL FIN & RUDDER -- 1 set
      TAIL LANDING GEAR -- 1 set
      TAIL WHEEL Ø25mm -- 1 pc.
      SCREW PA3x12mm -- 2 pcs
      COLLAR Ø2.1 w/ Set Screw -- 1 set

11. FUEL TANK 380cc -- 1 set
 

     CABLE TIE 1.5x5x400mm -- 1 pc.

      DOUBLE-SIDE TAPE 40x100mm -- 1 pc.

12. ENGINE MOUNT PL5111070 -- 1 set
      SOCKET HEAD SCREW M4x25mm – 4 pcs
      WASHER d4xD9mm -- 4 pcs

13. SOCKET HEAD SCREW M4x30mm – 4 pcs
      WASHER d4xD9mm -- 8 pcs

      M4 NUT -- 8 pcs
      THROTTLE PUSHWIRE  Ø1.2x300mm -- 1 pc.
      PLASTIC TUBE d2XD3x200mm -- 1 pc.

14. COWLING --1 pc.
      TRANSPARENT 3D TEMPLATE -- 1 pc.
      SCREW PA3x12mm -- 4 pcs
      SCREW PM3x8mm -- 4 pcs
      WASHER d3xD7mm -- 8 pcs
      M3 NYLON INSERT LOCK NUT -- 4 pcs
      ALUMINUM PLATE 

1.5x10x153mm -- 2 pcs

      SPINNER Ø63mm PH26W0630 -- 1 set

15. CANOPY -- 1 pc.
      PILOT(PC001086A) -- 1pc.
      DOUBLE-SIDED TAPE -- 1 pc.
      SCREW PWA2.3x8mm -- 4 pcs   
      SCREW PA2x6mm -- 2 pcs
      SILICON GROMMET d1.5 x D6.5mm (For Canopy) -- 4 pcs
      ALUMINUM PLATE (For Fixing Antenna) -- 1 pc.
      ANTENNA -- 1 pc. 

16. TRI-HORN M3x14mm (L) -- 1 set
      SCREW PB2x12mm -- 3 pcs
      CLEVIS -- 1 pc.
      PUSHROD Ø1.8x730mm w/ Threads (For Rudder) -- 1 pc.
      FUEL TUBE Ø6x5mm--1 pcs

17. TRI-HORN M3x9mm (L) -- 2 sets
      SCREW PB2x16mm -- 6 pcs
      CLEVIS -- 2 pcs
      FUEL TUBE Ø6x5mm -- 2 pcs 
      PUSHROD Ø1.8x655mm w/ Threads (For Elevator) -- 2 pcs

18. LINKAGE CONNECTOR Ø2.1mm w/ Set Screw -- 1 set

19. PLYWOOD 3x44x121mm (For Throttle Servo) -- 1 pc.
      BALSA 7 x 7 x 40mm (For Fuselage Servo Stand) -- 4 pcs
      PLYWOOD 6x60x119mm (For Rudder & Elevator Servo ) -- 1 pc.
      SPONGE 10x80x200mm -- 2 pcs
      FUEL TUBE Ø6x5mm -- 2 pcs
      STRAPER -- 2 pcs
      PUSHROD CONNECTOR PL4410010 -- 1 set
      PUSHROD Ø1.8x80mm (For Elevator) -- 1 pc.

20. SOCKET HED SCREW M4x35mm -- 2 pcs
      WASHER d4xD15mm --2 pcs
 
21. DECALS: A064SDEC -- 1 set 
      COVERING FILM -- 2 pcs

Содержание Zero Fighter 60S

















Отзывы: