17
Main Wing
(Lower)
PM4x40mm
Screw
1
d4xD15mm
Washer
3
PM4x30mm
Bottom View
d4xD15mm
Washer
P.9
PLYWOOD 3x282x309mm
PLYWOOD 6x133x243mm
SIDE CABANE
WING INCIDENCE ANGLE TEMPLATE
Outer wing cabane
should fit to the outside
of outer wing cabane
mounts.
With the wing incidence
angle template still in place,
position the side cabanes,
mark and drill the side cabane
mounts and fasten with
PM3x16mm screw and nut.
PM3x16mm
d3xD7mm
Washer
PM3x16mm
M3 Nylon Insert
Lock Nut
M3 Nylon Insert Lock Nut
3mm
3mm
d3xD7mm
Washer
PM4x40mm
d4xD15mm
Washer
PM4x30mm
Screw
2
PM3x16mm
d3xD7mm
Washer
M3 Nylon
Insert Lock Nut
d3xD7mm
Washer
3mm
PM3x20mm
18
Main Wing
d3xD7mm
Washer
28
M3
Nylon Insert Lock Nut
14
PM3x16mm
Screw
13
PM3x20mm
Screw
1
Plywood
6x20x36
.
6mm
Pierce the two pre-drill
holes at upper wing center
cabane mount and fasten the
center cabanes with
PM3x16mm & PM3x20mm
screw and nut. With the lower
wing fastened to the fuselage,
insert the wing incidence
angle templates to both sides
of upper and lower wing to
hold the upper wing in
position. Drill and fasten the
center wing cabane with
2
B
2
A
All manuals and user guides at all-guides.com
