By-Pass Damper
The By-Pass damper will balance the air flow proportionally to the air flow
demand form each room(zone).
The damper will be motorized directly from the controller in the room(zone).
Connect the
By pass motor
to the ZC207DK
controller using prefabricated
Red/Black cable supplied by the Manufacturer.
Remot
Control
Dry Contact
12V
P N
Main Power
230 VAC
12V
K1 K2
BY-PASS
C_out
C_in
#7
#6
#5
#4
#3
#2
#1
12VAC
EMG
Wall
Thermostat
Remot
Control
ZC200PS
MOTOR
Flush Wall
Thermostat
Remot
Control
Wall
Thermostat
Flush Wall
Thermostat
12345678
DAMPER
MOTOR
MOTOR
MOTOR
MOTOR
MOTOR
MOTOR
DAMPER
DAMPER
DAMPER
DAMPER
DAMPER
DAMPER
Round Dampers
The controller will Motorize the following dampers size 4" ,6", 8", 10" 12" &14".
Each damper will be Motorize by a
DC motor
.
It is possible to multiply the damper size at
channel #1
. Turn
ON
Dip
SW. #1
.
Connect the motors to the ZC207DK controller using prefabricated Red/Black
cable supplied by the Manufacturer.
The
K1
and
K2
relays ratings are: 250 VAC, 2 Amps.
