Dip Sw. Settings:
Dip SW. #1
= Defines that at Channel
#1 the size of the damper is doubled.
Dip Sw. #2 = Define if the K1 relay will
have 1 second pulse after power up or
not. [For Sanyo units].
Dip Sw. #3 to #8 = Not used.
ZC207DK controller:
o Made engineering Plastic ABS
V-0
o Voltage supply to the Motors dampers 12 VDC
o Voltages supply of the Power unit: 240 VAC (205 VAC - 250 VAC),
o Conditions operating: 0ºC - 30ºC, between 5% and 95% of relative humidity,
without condensation
o Conditions of storage: -18
°
C with 60
°
C, between 5% and 95% of relative
humidity, without condensation
o Relative Humidity: 10% - 90% RH
o Certificate: EC
o Dimensions : 210 mm X 120mm X 55mm of height.
Power Supply C200PS
The Unit works with 230 Vac. 50/60 Hz.
Use 3 wires cable type 250 VAC, 0.5 mm.
Built according to CE and UL standards.
Dimensions : C200PS: 125 mm X 120 mm X 60 mm.
Plastic Body ABS
V-0
The ZC207DK must be connected to the
C200PS
power supply.
Use the Red/Black pre-fabricated cable supplied by the Manufacturer
ZC207
CH#1
M1
M2
Red
Black
Red
Black
Red
Black
Indication panel
7 Channel LEDS for each damper status indication.
2 LED's for each relay operation.
1 power LEDS for main power supply.
