Twitoplast OPAL RC-11, Инструкция по эксплуатации и руководство пользователя

Страница: 9 / 19

Before activating:
Make sure that the power supply
box is connected to the power
120v AC and that the green led in the
C315 power supply box is on.
BATTERIES REPLACMENT AND REAL TIME
CLOCK SETTING.
Slide down the batteries cover that is located at the
back of the remote control. Insert two 1.5V size AAA
batteries.
After placing the batteries, the real time clock on the
display (10) will blink 0:00. Set the actual time by pressing
the +/- buttons (2).when the digits show the real time,
press SET (14) for setting the time.
The real time clock can also be set using the CLOCK button
(12) and then the same procedure using the +/- buttons (2)
and SET (14).
Please, pay attention to the following
The remote control signal can be received at a distance of up to 7 meters.
Communication between the Remote control and the I.R receiver is done
via infrared signal. Therefore, the Remote control should always be aimed
directly at the I.R receiver, without any obstructions.
Neither the Remote control nor the I.R Receiver should be exposed to direct
sun light or florescent light or any heat source.
Using the RC-11 to Activate the Proportional Damper
8