Twitoplast OPAL RC-11, Инструкция по эксплуатации и руководство пользователя

Страница: 16 / 19

±
≤
≥
¥
µ
∑
∂
±
≤
≥
¥
µ
∂
∑
The I.R receiver includes leds that represent the mode of operation and a button that enable operating
the DAMPER unit.
THE I.R RECEIVER
COOL LIGHT (LED)
The COOL light indicates that the DAMPER unit is operating in cool mode. Recieving signal
from the Remote control is indicated by a blinking of the light(led).
HEAT LIGHT (LED)
The HEAT light indicates that the DAMPER unit is operating in heat mode. Recieving signal
from the Remote control is indicated by a blinking of the light(led).
1/3 LIGHT (LED)
The ? light indicates that the DAMPER unit is operating in MANUAL mode and the DAMPER
is ? open. Recieving signal from the Remote control is indicated by a blinking of the light(led).
2/3LIGHT (LED)
The ? light indicates that the DAMPER unit is operating in MANUAL mode and the DAMPER
is ? open. Recieving signal from the Remote control is indicated by a blinking of the light(led).
When the ? light and the ? light are lighting together, it indicates that the DAMPER is fully
opened.
POWER ON/OFF LIGHT (LED)
The POWER light indicates that the DAMPER unit is ready to operate. When the light is off the
DAMPER is Closed.
AUTO BUTTON
Auto button enables operating the DAMPER unit when the remote control is missing OR when
the batteries are low. Pressing the button while the DAMPER button is OFF, will move the damper
from off to on positions ?, ? , full opening and then back again to to close position.
I.R RECEIVER
Receive signal from the Remote Control.
15
OPA
L 612D