www.twistyride.com
6
excess cable into a 10 cm bundle and securing it to a fixed
part of the motorcycle using zip ties or electrician tape.
FITTING INSTRUCTIONS
In order to fit the charger, first pass the cable of the charger
through the fairing / body of the vehicle such that the
following is validated in order:
1. The quick release connector has enough leeway to
allow the rider to plug / unplug it easily from the
dashboard;
2. The quick release connector has enough leeway to
allow the iPhone connector to be plugged into the
iPhone without restricting any movement of the
handlebars;
3. The cable is as hidden from view as possible;
4. The cable is secured to the body of the vehicle
every 10 cm using zip ties or electrician tape;
5. The power converter is secured to the body of the
vehicle (zip ties / electrician tape);
6. The on / off switch is easily accessible from the
outside of the bike;
7. The on / off switch is secured to the body of the
vehicle (zip ties / electrician tape);
8. The battery connectors can reach their respective
battery poles (red to + and black to -).
