www.twistyride.com
5
FITTING THE IPHONE C H ARGER
CAUTION
Extreme care must be taken when mounting the iPhone
charger on a motorcycle or scooter. Read this document
carefully before fitting the charger. The charger shall be
mounted in compliance with the relevant legislation and the
vehicle manufacturer's rules. Failure to mount the charger
correctly could result in damage to your vehicle and serious
injury to the vehicle rider and other road users. The iPhone
charger is fitted on your motorcycle or scooter at your own
risk. In doubt, always refer to a qualified professional.
CHARGER CABLE
The power cable shall be routed to avoid sharp bends,
abrasion, overheating, exhaust gases and battery acids and
other potential hazards. It must not be strained nor distorted
by e.g. excessive tightening of cable ties. Ensure that all
connections are mechanically and electrically safe and
secure. Keep away from heat sources and vehicle controls.
It must not hinder the operation of safety equipment nor
interfere with the driver’s ability to control the vehicle.
The charger has a total cable length of 3200 mm to the
quick release connector. It is long enough to accommodate
most types of motorcycles or scooters and be hidden within
the fairing. Excess length should be dealt with by rolling the
