Twister UltraClean, Руководство пользователя

Страница: 30 / 52

T W I S T E R T R I M M E R . C O M p g | 2 8
For the UltraClean to clean most e ff ec vely, the tanks needs to be cleaned themselves every 20-40
uses. To clean the UltraClean:
1. Ensure all users are wearing protec ve gloves and eyewear.
2. Ensure the UltraClean is switched o ff .
3. Ensure the UltraClean is plugged in to prevent electric shock and water damage to
uncovered plug ends and sockets.
4. Ensure the INLET valve is closed.
5. Ensure the liquid in both tanks is room temperature or colder in prepara on for
draining. Do not drain the tanks if the liquid is any warmer than room temperature. This
will cause a sudden change in temperature to the hea ng tubes and transducers
resul ng in serious damage to those components.
6. Open the MAIN TANK VALVE , STORAGE TANK VALVE , and OIL SKIMMER VALVE to
drain both tanks. Keep these valves open during cleaning.
7. Spray the walls and fl oor of the tanks so any solids are forced down the drains.
8. Spray all surfaces of the UltraClean tanks (including the underside of the lid) with a
foaming degreaser * or 70% isopropyl alcohol.
9. Allow the detergent/alcohol to sit for fi ve minutes.
10. Pressure wash the tanks to remove any remaining foam/alcohol.
11. Re fi ll the tanks (see Step 2: Fill the Tanks on page 21).
*
The Twister Foam Cannon makes spraying foaming degreasers
much easier and is available for purchase from Keirton (for
purchasing details, see
Consumables, Spare Parts, and
Accessories on page 44).
KEEP THE ULTRACLEAN
PLUGGED IN DURING CLEANING
TO PREVENT WATER DAMAGE
AND ELECTRIC SHOCK.
DANGER
!
DO NOT DRAIN THE TANKS WHILE
THE LIQUID INSIDE IS WARMER
THAN ROOM TEMPERATURE.
CAUTION
!
C L E A N I N G