- 8 -
1
Handler
2
Cooling fan: temperature heat fan operation, please make sure of good ventilation
3
RS232 interface: for PC control
4
SYNC interface: output synchronization controlled signal (Positive inside, negative outside)
5
Input/output connecting bar (L N G, L N G)
6
Fuse holder with safe fuse inside
7
AC output socket
8
Cooling fan: temperature heat fan operation, please make sure of good ventilation
13B
3.3 Operation Instructions
WARNING
Before connecting to local AC mains check and make sure to use
correct AC power to the power supply.
Connect the protective grounding conductor of the AC power cord to an
earth ground to avoid electrical shock.
Switch off all switches.
20B
3.3.1 Power On
Before power on, please make sure that the input AC power source is in compliance with the
specified input power of the e unit. And all switches on the unit shall be at OFF position. Make
good connection to the connecting bar.
Press the POWER button to turn on the power supply, the LCD display will display model number
and version. And the CPU will recall the last panel settings, because the panel settings have been
memorized into the EEPROM each time after power off.
3.3.2 MENU
In standby mode, press MENU key to switch between NORMAL mode, PROGRAMMABLE mode
and SYSTEM setup. Please refer to the following:
