4 of 8
496350 Issue 1
LED Indicators
5 LEDs.
2 x Red - Alarm/Test/Trouble.
2 x Green - PIR.
1 x Yellow - M/W.
Mounting
Flat ceiling mounting. (Flush Mount Kit available).
Physical
Dia. x Depth 120 x 55mm.
Approval
DTI Spec. MPT1349.
Warranty
5 years.
Recommended mounting height is between 2.4m and 4.6m (Figure 2). Avoid
heights in excess of 4.6m as the detection sensitivity declines to an inadmis-
sible level.
Figure 2. Graph of Range vs Mounting Height (see Fig 1 for a, b and c)
Specification subject to change at any time.
Wiring Connections
1.
Ensure that the wiring has no power applied.
2.
Connect terminals 1, 2 and/or 3 to the control panel or warning device,
depending on circuit requirements.
3.
Connect terminal 4 to the positive supply.
4.
Connect terminal 5 to the 0V supply.
5.
Use Terminal 6 (EOL) as a connection point for EOL devices.
6.
If the control panel has a 0V Test facility, connect terminal 7 (Test) to
the control panel Test connection. If connected the ‘Walk Test’ LEDs
will be enabled only when ‘Walk Test’ is selected at the control panel. If
no Test facility is available at the control panel, a switch can be used to
switch the 0V supply to terminal 7.
Wiring Connections
1084
