6
Fig. 7
7. PLEASE READ ALL “ELECTRIC FIREPLACE
INSERT” INSTRUCTIONS PRIOR TO INSTALLING
ELECTRIC INSERT INTO YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE INSERT
INTO YOUR FIREPLACE CLOSE TO ITS FINAL
POSITION.
Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across hearth/base (A) as it may scratch your unit.
Connect the insert support bar (J) to the inside left
and right panels, using the bolts (AA) and washers
(BB) through pre-drilled holes (Fig.7).
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS FINAL
POSITION.
Completed
Unit
Electric
Fireplace Insert
Install
Insert
From
Back
Hardware Used
BB
AA
Bolt
x 2
Washer
x 2
BB
J
AA
8. We have included two tipping restraints (EE) for
this unit. You must install this hardware to prevent
accidents or injuries. When properly installed this
restraint can provide protection against unexpected
tipping of the unit due to small tremors, bumps or
climbing. We strongly recommend mounting this
hardware to a wall stud and your unit (Fig.8).
Warning
: You must install the tipping restraints (EE)
hardware to help prevent accidents or
damage to the unit.
Hardware Used
EE
Tipping Restraint
Hardware
x 2
Fig. 8
Cabinet
Wall Stud
Wall
EE
EE
EE
