TwinMOS G245, Руководство пользователя

Страница: 39 / 57

G245 WLAN Card
WWW.TwinMOS.COM
Page 38
any
Click “any” button to enable SSID.
Network Type
The G245 WLAN adapter can operate in one of two modes, which are specified in the Mode field of the
Configuration menu. Clicking the down arrow at the right of the Mode field displays the available
modes.
Ad-Hoc - This is the 802.11g Ad-Hoc mode of operation. In “Ad-Hoc” mode, only one wireless
“ cell ” is supported for each different NETWORK NAME. All communication is done from
client to client without the use of an Access Point. “Peer-to-Peer” networking uses the same
NETWORK NAME for the wireless adapters in establishing the network connection. When
“Ad-Hoc ” mode is selected, the utility will provide a selection for setting the channel.
Infrastructure - This mode of operation requires the presence of an 802.11g Infrastructure. All
communication is done through the Infrastructure, which relays packets to other wireless clients
as well as to nodes on a wired Ethernet network.
Pseudo IBSS - This mode is for manufacture testing.
Encryption
Select the “ Enable WEP ” or “ Disable WEP ” by the “ Encryption ” drop down menu.
Authentication Mode
This setting has to be consistent with the wireless devices, which the adapter intends to connect.
‧
Auto – Auto switch the authentication algorithm depending on the wireless devices, which the
adapter is connecting to.
‧
Open System – No authentication is needed among the wireless devices.
‧
Shared Key – Only wireless devices using a shared key (WEP Key identified) are allowed to
connecting each other. Setup the same key as the wireless devices, which the adapter intends to connect.
Change
Click “Change” button to enable General Connection Setting Table.
Apply
Click “Apply” button to save and implement the new settings.