TROUBLE SHOOTING GUIDE
E-7
PROBLEM SOLUTION
1.
No power. All switches are in the
“
”
ON position and the unit does not work.
2. The emberbed is glowing, but the
flame is not functioning properly.
3. The flame effect is functioning, but
the heater does not blow out warm air.
4. Heater does not work, while HEAT
switch is in the
“
”
ON position.
1. Check that the unit is plugged into a standard
120V power outlet.
2a. Open the back panel of the unit. Check whether
the spinner spindle was connected to the motor.
2b. Check whether Flame Generator drive motor
is running. If not, call the customer service.
3. Check that Mechanical Thermostat Knob whether
is set to the highest setting (clockwise).
4. Turn all switches to the OFF position and unplug
the unit from the wall outlet for 5 minutes. After
5 minutes, plug the unit back into wall outlet and
operate as normal.
Meijer.com
