E-4
N
N
N
N
N
N
N
G2
G1
Right Top
Panel
Left Top
Panel
L
L
M
M
11. Attach Side Back Panels (R) and Center
Back Panel (V) to the back of the completed
assembly from step 10. Use a Phillips Head
Screw Driver, tighten Wood Screws (Q1)
through the pre-drilled holes in the Side Back
Panels (R).
10. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom,left
and right.
R
R
V
Q1
Q1
Side
Back
Panel
Side
Back
Panel
Center Back
Panel
9. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 8. Then locate Top Panel
(G1, G2) and lay f nished side up on top of
completed assembly. From the inside, attach
Top Panel (G1, G2) using Bolts (L) and
Washers (M) through the pre-drilled holes in
the mounting blocks.
HAND
TIGHTEN
ONLY.
