E-2
For a complete tight f t every bolt
should have a f at washer.
All panels are labeled Left and Right as
viewed from the front of unit.
1. Locate the Center Left Side Panel (B), Center
Right Side Panel (C), Center Front Panel (D),
and set out face down on a scratch-free
surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Center Left Side Panel and Center
Right Side Panel snug to the Center Front
Panel. Make sure the Wood Dowels are seated
in the pre-drilled holes. Insert Bolt (L) and
Washer (M) into the holes in the mounting
blocks.
HAND TIGHTEN ONLY.
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make
sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: www.twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
CAUTION:
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
HELPFUL HINTS
•
Some steps are more easily handled with two adults.
•
Attach the f replace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
•
Use care in assembling your new f replace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
•
Do not sit on any part of the mantel.
CARE & CLEANING
1. Dust your f replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your f replace with a gentle non-abrasive household cleaner. Make sure to dry your
f replace immediately with a soft cloth or towel.
Hearth/Base
Center
Left
Side
Panel
Center
Right
Side
Panel
Center
Front Panel
L
L
M
M
N
N
N
N
N
N
N
B
C
A
D