Completed
Unit
E-5
Install
Insert
From
Back
Electric
Fireplace Insert
12. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
13. Lift insert carefully into the back of the
unit and center in the insert opening. Do
not dr ag insert across Hearth/Base (A) as
it may scratch your unit.
14. Install the mounting brackets to hold
insert flush against the inside of the
mantel front panel.
PLEASE READ ALL “ELECTRIC
FIREPLACE INSERT”
INSTRUCTIONS PRIOR TO
INSTALLING ELECTRIC INSERT
IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR
FIREPLACE CLOSE TO ITS
FINAL POSITION.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES.
MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO
PEOPLE TO MOVE COMPLETED
UNIT INTO ITS FINAL POSITION.
Top
Corner
Extension
P
M
L
M
L
we recommend having an assistant
hold the back corner of the top piece
during steps 15, 16 and 17.
15. Carefully slide Top Corner
Extension piece into place at rear
of Mantel/Top. Then use Bolts (L)
and Washers (M) through the
pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
18DM1141-ESF-15Dec_09.indd 6
2009-12-15 15:35:11
