5 | www.twineaglesgrills.com
VENT HOOD KNOCK-OUTS AND MOUNTING LOCATIONS -cont:
FIG 1B
MOUNTING HOLE
MOUNTING HOLE
MOUNTING HOLE
MOUNTING HOLE
X 4
MOUNTING SCREW
Installation of the Vent Hood should also take into account the unit that the Vent Hood is to be installed above.
For best ventilation of smoke and heat, make sure the vent hoof is centered above the appliance and a min-
imum of 36 inches above the cooking surface. Refer back to the appliance manual to be sure distances and
clearances to combustible construction are maintained.
Mounting locations are shown in FIG 1B:
Mounting surface must be a minimum of 3/4” thick. Mount Vent Hood to desired construction using #10
wood screws. A minimum of four #10 wood screws are needed to mount the Vent Hood. Longer screws may
be required if wall board or other nonstructural surfaces are used between the hood and the main mounting
surface. Anchors may be required if mounting screws do not engage the wood structure.
Use of furring strips to level the cabinet mounting surface may be required. Refer to FIG 2 for ducting clearanc-
es and furring strip locations.