1
ASSEMBLY INSTRUCTIONS
(A) Caster w/ Brake
(qty. 2)
(TEGB54SD-B: qty 3)
(B) Caster (qty 2)
(TEGB54SD-B: qty 3)
(D) Shelf Bracket (left)
(qty 2)
(E) Shelf bracket (right)
(qty 2)
(G) Hex-head Philips
screw (pre-installed w/
washers) (qty 2)
(I) 10-32 x ½” Phillips
screw (qty 2)
(C) ¼”-20 hex nut
(qty. 16) (TEGB54SD: qty 2)
(F) Flat head screws
(qty: 8)
(H) Flat-washer
(preinstalled w/ hex
screw)
(qty 2)
1.
Install casters with brakes (A) at the front of the base
and casters without brakes (B) at the rear and secure
them with nuts (C).
2.
Install shelf brackets (D) and € securing them with
screws (F) and side shelves.
3.
Remove hex head screws (G) and flat-washer (H) using
a 5/16” wrench and place the grill head into the cart.
4.
Install the hex-head screws (G) with flat-washer (H)
back into place by initially hand tightening them. Then
use the 5/16” wrench to tighten the screws completely.
5.
Fasten the BBQ grill at the top-rear corners using the
Phillips screws (I), reference picture no. 2
(B)
(C)
(A)
(D)
(E)
(F)
( I )
( I )
(G)
(G)
(H)
(H)
