Twin Eagles TEBQ30G-C, Инструкция по установке, использованию и уходу

Страница: 18 / 36

13
ASSEMBLY INSTRUCTIONS
Your
T
WIN
E
AGLES
Grill is fully assembled and tested in the factory and requires no major assembly in
the field. For the purpose of safe shipping and transit, some parts such as the briquette trays and rotisserie
components are wrapped inside the grill and require minor assembly.
TO INSTALL BRIQUETTES TRAYS
1. Put briquette trays into the grill above the burner, as shown by
placing the flash-tube-hole on the front.
2.
Place the hexagonal grates directly above the briquette trays
and make sure the square openings on the grates are at the
front.
TO INSTALL AND USE THE SMOKER BOX
1. Lift open smoker box lid and add soaked wood chips with
water.
2. Remove a hex grate. Remove a ½ sized briquette tray where
there is no flash tube.
3. Place the smoker box in place of the briquette tray and the
smoker box will always line-up on top of the burner flame.
Place hex grate back over the smoker box. Turn on grill to
HIGH heat. Once smoking starts, turn the heat down to
prevent wood flare-up. Smoker box is standard on all grills.
4. Warning: Do not use smoker box over the sear burner.
WARMING RACK LEVEL POSITIONS :
The warming rack may be used at a HI and LOW level position.
The HI level is further away from the heat source while the lower
level position is closer to the heat source.
When the warming rack is not in use, it may be moved out of the
way by moving up to the top support hooks.