twin busch TW X-11 Скачать руководство пользователя страница 3

Страница: 3 / 36

TWIN BUSCH GMBH

Technical changes for purposes of a technical advancement as well as deviation in colour, errors and printing mistakes are reserved.

1. Introduction/application

This automatic tyre machine is especially designed for the removal and fitting of standard tyres up to small transporters

(12” outer & 24” inner).

Attention:

This machine is only designed for the removal and fitting of tyres, under no circumstances should you use this

machine for any other purpose. The manufacture will not accept any responsibility for damage or injury caused

by misuse.

2. Safety precautions

Only qualified personnel are allowed to operate the TW-X11 tyre fitting machine.

If the machine is damaged or needs parts replaced, work should be stopped immediately. For advice and repairs please

contact the manufacture or dealer for further information.

The manufacture offers a one year guaranty on the whole machine. Damage caused by misuse will not be covered.

Содержание TW X-11





































Результаты поиска

Содержание TW X-11

Отзывы:

Похожие инструкции для TW X-11

Бренды по названию

Популярные бренды

twin busch TW X-11, Инструкция по установке, эксплуатации и ремонту

Результаты поиска

Содержание TW X-11

Отзывы:

Похожие инструкции для TW X-11

Бренды по названию

Популярные бренды