twin busch TW X-11, Инструкция по установке, эксплуатации и ремонту

Страница: 12 / 36

TWIN BUSCH GMBH
Technical changes for purposes of a technical advancement as well as deviation in colour, errors and printing mistakes are reserved.
12
11.3. Removal of the tyre
To avoid accidents always keep hands and other body parts away from moving parts when operating.
- Place the mounting head on the rim using the swing arm and adjust the distance, press the button on the swing
arm to fix the position. The mounting head will automatically lift 2 or 3 mm.
- Insert the tyre lever between the tyre and right side of the mounting head and pull the tyre over the mounting head.
(See Fig. 7-8).
Attention:
With spoked rims there is a danger of damaging the rim please use the plastic mounting head
(available as accessories).
Caution:
If the wheel is fitted with an inner tube it is recommended to place the valve approximately 10 cm to the left of the mounting
head to avoid damage to the tube.
- Hold the tyre lever in position (Fig. 8) and press the pedal (J), the turntable will turn clockwise and the tyre will be
forced over the mounting head. Keep pedal pressed until the tyre is completely removed from the rim.
- When fitted remove the inner tube.
- Repeat the steps to dismount the back side of the tyre and remove from rim.
Mounting head
Valve
Tyre lever
Direction
Fig. 8 Fig. 7