3
Instruction Manual
IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS AND WARNINGS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FALURE
TO DO SO MAY CAUSE DAMAGE TO PROPERTY AND/OR SERIOUS PERSONAL INJURY. PLEASE KEEP THIS
INSTRUCTION MANUAL SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS AND WARNINGS
1.1 Use a qualified person to maintain the press in good condition.
1.2 The maximum load is 20 tons.
DO NOT
exceed this rated capacity. Never apply excessive force to a workpiece and always use
the pressure gauge to accurately determine the applied load.
1.3 Use this press for the purpose for which it is intended.
DO NOT
use it for any other purpose it is not designed to perform.
1.4 Keep children and unauthorized persons away from the work area.
1.5 Remove loose fitting clothing. Remove ties, watches, rings and other loose jewelry, and contain long hair.
1.6 Wear ANSI approved impact safety goggles, full-face impact safety shield and heavy-duty work gloves when operating
the press.
1.7 Keep proper balance and footing, do not overreach and wear nonskid footwear.
1.8 Only use this press on a surface that is stable, level, dry and not slippery, and capable of sustaining the load. Keep the surface
clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
1.9 Inspect the press before each use.
DO NOT
use if bent, broken, cracked, leaking or otherwise damaged, any suspect parts are
noted or it has been subjected to a shock load.
1.10 Check to ensure that all applicable bolts and nuts are firmly tightened.
1.11 Ensure that the workpiece is center-loaded and secure.
1.12 Keep hands and feet away from bed area at all times.
1.13
DO NOT
use the shop press to compress springs or any other item that could disengage and cause a potential hazard. Never
stand directly in front of loaded press and never leave loaded press unattended.
1.14
DO NOT
operate the press when you are tired or under the influence of alcohol, drugs or any intoxicating medication.
1.15
DO NOT
allow untrained persons to operate the press.
1.16
DO NOT
make any modifications to the press.
1.17
DO NOT
use brake fluid or any other improper fluid and avoid mixing different types of oil when adding hydraulic oil. Only good
quality hydraulic jack oil can be used.
1.18
DO NOT
expose the press to rain or any other kind of bad weather.
1.19 If the press needs repairing and/or there is any part that needs to be replaced, have it repaired by authorized technicians and
only use the replacement parts supplied by the manufacturer.
1.20
WARNING:
the warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
2. SPECIFICATIONS
Capacity 20 ton
Stroke 185 mm
Working Range 68.5-1028.5 mm
Bed Width 542 mm
