twaudio VERARF600i, Руководство по сборке

Страница: 28 / 46

VERA RF600i Assembly Instructions
28
Figure 4.13.1 – Front mounting of the last VERA20i loudspeaker
4.13 Setting up the last VERA20i loudspeaker in a flown system
Continue to set up the VERA20i loudspeaker system as follows:
1. Please note that setting up the VERA RF600i rigging frame always requires two persons!
2. Place the last VERA20i loudspeaker with its back on the floor.
3. Place a pad under the loudspeaker to avoid damage.
4. Insert the splay links of the VERA20i loudspeaker into the openings at the
VERA20i loudspeaker.
5. Attach the last loudspeaker to the flown system using two cylinder screws, item 2 and
two lock washers, item 3 from the VERA20i loudspeaker scope of delivery.
6. Make sure to properly insert the lock washer as described in section 4.7!
7. Make sure that the screws with the lock washers are attached (but not tightened) to the
VERA20i loudspeakers on the left and right side.
4.
3.
WARNING
WARNING
WARNING