background image

Assembly Instructions SBT20i

5

1. Safety | Intended use

The SBT20i swivel bracket was developed for use in professional sound systems. 

The 

swivel 

bracket

 may only be used by trained and qualified personnel.

The SBT20i swivel bracket may only used with the T20i loudspeaker. 

This rigging manual describes how to use the SBT20i swivel bracket correctly. Any other use 
shall be deemed improper and may result in damage or even injury.

Modifications or alterations to individual parts of the SBT20i swivel bracket are not permitted! 
Danger to life!

WARNING

Before every operation, check the scope of delivery of the SBT20i swivel bracket for its com-
pleteness and ensure that all parts are in perfect condition.

The scope of delivery includes specified components. Only use the recommended and cer-
tified components.

WARNING

The SBT20i swivel bracket is designed both for indoor and outdoor use.

CAUTION

The 

SBT20i swivel bracket

 may only be used by trained and qualified personnel. Personnel 

must check the 

SBT20i swivel bracket

 for suitability before each use.

WARNING

The 

SBT20i swivel bracket

 must be taken out of operation immediately as soon as visible 

damage to the parts can be seen.

WARNING

Please keep all elements of the 

SBT20i swivel bracket

 away from children! The small parts can 

easily be swallowed and lead to suffocation!

WARNING

Please adhere to the following safety instructions to avoid risks when using accessories.

Note the operating modes described in this assembly instructions. Other uses are not per-
missible.

Damage caused by improper use is not covered by TWAMBO.

Содержание SBT20i















Отзывы: