twaudio SBM15, Руководство по сборке

Страница: 6 / 14

Assembly Instructions SBM15
6
The payload of the SBM15 swivel bracket is designed of one M15 loudspeaker. Do not
exceed this payload.
WARNING
When moving (assembling, dismantling, maintaining) the SBM15 swivel bracket with
M15 loudspeaker, ensure sufficient space to prevent collisions with other objects.
WARNING
Do not squeeze or twist the electrical cables of the M15 loudspeaker during the installation of
the
SBM15 swivel bracket!
The respective national electrotechnical rules and regulations are
applicable.
CAUTION
All screw connections should be checked each time the SBM15 swivel bracket are installed.
Tighten all loose screws. If this is no longer possible, the screws must be replaced.
WARNING
Before mounting the SBM15 swivel bracket check that e.g. ceilings, trussus and tripods are
capable to carrying the payload of the components.
WARNING
WARNING
WARNING
Make sure that no water pipes, electrical lines or any other lines are behind the intended place
of mounting.
Only use wall plugs and screws which are suitable for the intended mounting and structural
fabric. All screws must be set and tightened properly. Ensure that the fixing holes have the
correct depth and diameter. Always use all fixing holes.