twaudio B10A, Руководство по эксплуатации

Страница: 8 / 20

Operation manual B10
8
2.2 Variants
The B10 loudspeaker comes in two different variants. The distinction is between the B10A
(ACTIVE model) and B10P (PASSIVE model).
Read manual before use !
Made in Germany
www.twaudio.com
NL4 pins reversed
S/N:
Never connect these
outputs to an amplifier
TOP A & B INPUT 1+/1- TOP A INPUT 1+/1-
TOP B INPUT 2+/2-
MONO
INPUT
STEREO
LINK
TOP A TOP B
TOP OUTPUTS
Risk of
damage
Only switch ON
with TOP connected
1+/-
2+/- 1+/-
2+/-
components:
prog. power:
impedance:
SPL max.:
frequency range:
weight:
1 x 10"
700W
123 dB
40Hz - 200Hz
20.1 kg
S1
S3
S2
Figure 2.2 - Overview selector switches
The standard version of the B10 loudspeaker is the B10A variant which can only be operated
in „ACTIVE“ mode. It comes with a standard connection panel. The separation takes place in
the amplifier DSP.
The B10P version can be used either passively (using the “MONO” and “STEREO” operating
modes) or active with the corresponding preset.
The integrated passive crossover (item 8 “Figure 2.1 - Overview” on page 7.) has three selector
switches that are described in the following chapter.
2.2.1 B10A / B10P model